LINEAR CONVENTIONAL LIGHTING EX

Linear conventional Lighting "Ex e" for Explosive Atmospheres Zone 1, 2, 21 and 22. Offers great practicality in installation, opening and closing, in addition to providing tool-free maintenance (hands only). Contains micro-switch that de-energizes the luminaire when the cover is opened, and a breather to prevent water condensation inside the luminaire. 

  • Documents

  • CERTIFICATION: Inmetro.
  • APPLICATION: Zone 1, Zone 2, Zone 21 e Zone 22.
  • TYPE OF PROTECTION: Ex e (increased safety); Ex m (encapsulated); Ex op is (optical radiaton - inherent safe); Ex q (immersed in sand); Ex t (dust ignition protection).
  • OPERATING VOLTAGE RANGE: 108 to 254 Vca/cc.
  • POWER: 20, 30, 40 or 60 W.
  • LAMPS: Led.
  • INGRESS PROTECTION: IP66W
  • TDS - Emergency and Convencional Lighting  

Related
products

LED DRIVER EX

Ex Driver for installation with four to eight Led Lamps 5 W or with two to four Led Lamps 10 W. For use in luminaires (Zone 1). High power factor. It can be used as a replacement for other Ex luminaire Drives (after analysis by a specialist). Supply voltage from 110 to 240 Vac/dc. Working temperature from -20 to 50°C.  

LED STRIP EX

Led strip Ex Sermatex (RLEX300 or RLEX600). Ideal for Ex "e" luminaires. With an assembly and disassembly system that allows easy and practical maintenance and replacement services in the field. Lower Energy Consumption. Greater luminous efficiency. Greater luminous flux. Lifetime 5 times longer when compared to the fluorescent lamp system. Certified for the type of protection Ex "op is" (Inherently Safe Optical Radiation). Operation Warranty Time: minimum of 4 years. Can only be used with Sermatex DVL70 drive.

PHOTOCELL PM003

Photoelectric relay intended for areas classified with the presence of flammable vapors and gases, its operation is switched according to the variation of the incident light. The photoelectric relay has a great differential. In addition to its modern and effective design, its electronic circuit was dimensioned with a protection system against transient flashes. Can be installed in Zone 1 (including explosion-proof), Zone 2, Zone 21 and Zone 22 luminaires and enclosures, for groups IIA, IIB, IIC, IIIA, IIIB and IIIC. Application temperature, withstands variation from -40°C to 70°C. Certified according to Inmetro (Brazil). The connection is made through the 3/8" BSP or M20x1.5 thread.